Emulsion Remover

Emulsion Remover INSTRUCTIONS

Please follow the instructions below to properly use the stencil remover:

1. Prepare the powder mixture as per the directions on the sachet.
2. Thoroughly clean any ink from the stencil.
3. Apply the liquid solution to both sides of the stencil.
4. Allow the product to set and work for 30 seconds to a minute.
5. Avoid letting the stencil remover dry on the mesh as it will cause the stencil to become locked in the mesh.
6. Gently scrub both sides of the stencil until clean.
7. Rinse off the stencil with a mild spray or a high-pressure washer.
8. If necessary, repeat the process.
9. Finally, wash the screen with SCREEN De-Greaser.

Remover Powder is a strong oxidant. Contact with combustible or flammable material can cause fire. It can cause skin and eye irritation. Use gloves and goggles. Clean spills immediately.
First Aid: In case of contact with the eyes or skin, flush immediately with water for at least 15 minutes. If irritation develops, contact a physician.